Product ID:ANDOK C, INDUSTRIAL LUBRICATING GREASE
MSDS Date:01/01/1985
FSC:9150
NIIN:00-261-8310
MSDS Number: BDPQS

Emergency Phone: 713-656-3424

Cage: GO864

Telephone: 713-656-5949 / 713-656-3424

Cage: 29700

PETROLEUM HYDROCARBONS

SODIUM SOAP

ADDITIVES

Effects of Overexposure:SKIN: IRRIT W/PROLONGED/REPEATED CNTCT. GREASE
INJECTED IN BODY: SERIOUS DELAYED SOFT TISSUE DAMAGE.

First Aid:SKIN: WASH THOROUGHLY W/SOAP & WARM WATER. EYES: FLUSH
W/CLEAR WATER 15 MIN OR UNTIL IRRIT SUBSIDES. INJECTED UNDER SKIN:
HI PRESS GREASE GUN INJECTION INJURY, REGARDLESS OF APPEARANCE OF
WOUND, SEE M D IMMED. POSS LOSS OF AFFECTED AREA.

Flash Point:390F COC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:FOAM, DRY CHEM, CO*2, WATER FOG, OR SPRAY
Fire Fighting Procedures:AIR-SUPP BRTH EQUIP. COOL CANS W/WATER SPRY.
AVOID FUMES.
Unusual Fire/Explosion Hazard:DO NOT MIX OR STORE W/STRONG OXIDANTS
LIKE LIQ CHLORINE OR CONC OXYGEN

Spill Release Procedures:RECOVER FREE LUBRICANT. ADD ABSORBENT: SAND,
SAWDUST, ETC TO SPILL AREA. KEEP PETROL PROD OUT OF SEWERS &
WATERCOURSES BY DIKING OR IMPOUNDING. ADVISE AUTH IF PROD HAS
ENTERED OR MAY ENTER SEWERS OR W ATER COURSES.

Handling and Storage Precautions:KEEP CNTNRS CLOSED WHEN NOT IN USE. DO
NOT HANDLE OR STORE NEAR HEAT, SPARKS, FLAME, STRONG OXIDANTS.
Other Precautions:AVOID BRTHNG OIL MIST. REMOVE LUBRICANT-SOAKED
CLOTHING & LAUNDER BEFORE REUSE. DISCARD LUBRICANT-SOAKED SHOES.
WASH SKIN THOROUGHLY W/SOAP & WATER AFTER HANDLING.

Respiratory Protection:NORM NOT NEEDED. IF NEC, USE NIOSH/MSHA APPRVD
RESP DEVICE.
Ventilation:MFR REC LOCAL EXHST
Protective Gloves:CHEM RESIST
Eye Protection:SPLASH GOG/FACE SHLD
Other Protective Equipment:CHEM RESIST APRON OR OTHER PROT CLOTHING TO
AVOID SKIN CNTCT
Supplemental Safety and Health
VAP PRESS <0.01, VAP DNSTY >12

HCC:V6
Boiling Pt:B.P. Text:>500F IBP
Spec Gravity:0.9500
Evaporation Rate & Reference:<0.01, N-BUAC
Solubility in Water:APPRECIABLE
Appearance and Odor:DARK BROWN GREASE, VERY SLT DISTNCT AROMATIC ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS: LIQ CHLORINE, CONC OXYGEN, NA/CA HYPCHLRITE
Hazardous Decomposition Products:FUMES, SMOKE, CO, SULFUR OXIDES IN
CASE OF IMCMPLT COMBUST

Waste Disposal Methods:DISPOSE OF ABSORBED MATL IN APPRVD WASTE
DISPOSAL SITE OR FACILITY. DISPOSE IAW FED, STATE, LOCAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.